32" Edge 540

This aerobatic plane was designed by Leadfeather from RcGroups. The Edge design was spun off of his popular Yak-55 design. With a little tweaking and a few new ideas it is another winner.

Details

Details of this plane can be found at RcGroups.
More details of this plane can be found at RcGroups.
These kits have been made avilable with the permission and support of LEADFEATHER.
The kit consists of all the foam pieces precut.
You have a foam choice of 1.3 lb "standard" or 1.5 lb "Beefy" EPP.
All of the control surfaces come prebeveled.
The wing spar slot is precut into the bottom of the wing and will accomidate a 3mm, 1/8" or 4mm carbon tube spar.

Hardware kit Details

1 - 4mm carbon tube spar
1 - 1.5mm carbon rod for pushrods and elevator stiffener
2 - wire for ailerons.
6 - wire z-bend w/ heatshrink for pushrods.
2 - carbon ribon tail stiffeners.
Other parts are available on the parts page.

Suggested equipment: (Most are available on the PARTS page)

Aileron Servo 9gr
Tail Servos 5gr
Speed control
Motor
Motor mount
GWS 8 x 4.3 prop
Control horns
2s or 3s, 360 to 500 mah battery

Paint Options

Due to time constraints I am taking a break from producing painted airplanes. This break will likely last through the month of August. We are sorry for any imconvenience.

Shipping

Shipping is $10 for up to any 3 kits to the USA. You can order more than 3 kits but the order will be broken up into multiple shipments. For international shipping see the SHIPPING page.