32" Sbach 342

This is one of the newer aerobatic planes out there. The wing design is similar to some of the other aerobatic aircraft. What sets it apart is the short tail moment. In my testing this short coupled aircraft did not pick up any bad traits but gained incredible pitch and yaw authority. I am very pleased with how this plane flys. I also think that it has a destinctive look to it that sets it apart from the rest of the crowd. If you are tired of the same old airplane designs then this one might be the one for you!

Details

Inspiration and input for this design came from mytmousemalibu and Spitfire222 on RcGroups and on this THREAD.
The kit consists of all the foam pieces precut.
You have a foam choice of 1.3 lb "standard" or 1.5 lb "Beefy" EPP.
All of the control surfaces come prebeveled.
The wing spar slot is precut into the bottom of the wing and will accomidate a 3mm, 1/8" or 4mm carbon tube spar.

Hardware kit Details

1 - 4mm carbon tube spar
1 - 1.5mm carbon rod for pushrods and elevator stiffener
2 - wire for ailerons.
6 - wire z-bend w/ heatshrink for pushrods.
Other parts are available on the parts page.

Suggested equipment: (Most are available on the PARTS page)

Aileron Servo 9gr
Tail Servos 5gr
Speed control
Motor
Motor mount
GWS 8 x 4.3 prop
Control horns
2s or 3s, 360 to 500 mah battery

Paint Options

The paint scheme is as pictured below with your choice of three colors.

Shipping

Shipping is $10 for up to any 3 kits to the USA. You can order more than 3 kits but the order will be broken up into multiple shipments. For international shipping see the SHIPPING page.